Printer Does Not Turn On

1. Check1 Press ON button until ON lamp lights up.

2. Check2 Make sure power plug is securely connected to printer, and then turn on again.

3. Check3 Unplug printer, leave it for at least 2 minutes, and then plug it back in and turn on again.

4. Check4 When you use battery, check battery level.

   Make sure that the battery level indicator lights when you press the battery level button.

   When you run the printer with the battery, it must be charged sufficiently. If the battery level is low, you can charge the battery by connecting the AC adapter to the printer. Or replace with a charged battery.

   Important

   • If the battery is discharged too much, it cannot be charged by USB connection. Charge the battery with the AC adapter.

   • When Charging by USB connection, charging is interrupted if the printer is turned on. When charging with the AC adapter, charging can be continued regardless of the power status. However, charging is interrupted when you start printing.

If this does not solve the problem, contact your nearest Canon service center to request a repair.